Loading...
« previous topic   next topic »
Pages: [1]   Go Down
Author Topic: I2C between 8MHZ & 16 MHz arduinos  (Read 285 times)
0 Members and 1 Guest are viewing this topic.
magnethead794
Ft. Worth, Texas
Offline Offline
God Member
*****
Karma: 0
Posts: 591
View Profile
« on: August 31, 2012, 09:47:43 pm »
 Bigger Bigger Smaller Smaller Reset Reset
Any issues with doing it? Just wondering. Need to link a FIO and a mega over I2C.
Yes I know level conversion will be needed.

(the other end of the xBee link is a FIO & teensy2.0++ pairing..same deal there)
« Last Edit: August 31, 2012, 09:54:59 pm by magnethead794 » Logged
KF5RVR

frank26080115
0
Offline Offline
God Member
*****
Karma: 0
Posts: 592
View Profile
« Reply #1 on: August 31, 2012, 10:29:20 pm »
 Bigger Bigger Smaller Smaller Reset Reset
there shouldn't be any issues

level conversion will not be needed, just disable internal pull-up resistors and use external pull-up resistors that "pull" to 3.3V
Logged
I'm an electrical engineering student. I designed the USnooBie (V-USB dev kit) which is sold at Seeed Studio

magnethead794
Ft. Worth, Texas
Offline Offline
God Member
*****
Karma: 0
Posts: 591
View Profile
« Reply #2 on: August 31, 2012, 10:43:13 pm »
 Bigger Bigger Smaller Smaller Reset Reset
Quote from: frank26080115 on August 31, 2012, 10:29:20 pm
there shouldn't be any issues

level conversion will not be needed, just disable internal pull-up resistors and use external pull-up resistors that "pull" to 3.3V

So the 5V signals coming from the 5V board won't overdrive the 3V3 pins?
Logged
KF5RVR

James C4S
Austin, TX
Offline Offline
Faraday Member
**
Karma: 41
Posts: 5162
CMiYC
View Profile
WWW
« Reply #3 on: August 31, 2012, 10:46:08 pm »
 Bigger Bigger Smaller Smaller Reset Reset
Quote from: magnethead794 on August 31, 2012, 10:43:13 pm
So the 5V signals coming from the 5V board won't overdrive the 3V3 pins?
That's why you use external pull-up resistors.
Logged
www.cmiyc.com - A guide to being an Enginerd

magnethead794
Ft. Worth, Texas
Offline Offline
God Member
*****
Karma: 0
Posts: 591
View Profile
« Reply #4 on: August 31, 2012, 10:51:40 pm »
 Bigger Bigger Smaller Smaller Reset Reset
Quote from: James C4S on August 31, 2012, 10:46:08 pm
Quote from: magnethead794 on August 31, 2012, 10:43:13 pm
So the 5V signals coming from the 5V board won't overdrive the 3V3 pins?
That's why you use external pull-up resistors.

Doesn't make sense to me, but I'll go with it.
Logged
KF5RVR

James C4S
Austin, TX
Offline Offline
Faraday Member
**
Karma: 41
Posts: 5162
CMiYC
View Profile
WWW
« Reply #5 on: August 31, 2012, 10:54:38 pm »
 Bigger Bigger Smaller Smaller Reset Reset
Research "open collector".

The I2C pins are open-collector.  They need to be pulled-up so if you external resistors and pull them up to 3.3V they become 3.3V pins.
Logged
www.cmiyc.com - A guide to being an Enginerd

magnethead794
Ft. Worth, Texas
Offline Offline
God Member
*****
Karma: 0
Posts: 591
View Profile
« Reply #6 on: August 31, 2012, 10:58:52 pm »
 Bigger Bigger Smaller Smaller Reset Reset
Quote from: James C4S on August 31, 2012, 10:54:38 pm
Research "open collector".

The I2C pins are open-collector.  They need to be pulled-up so if you external resistors and pull them up to 3.3V they become 3.3V pins.


works for me.
Logged
KF5RVR

Pages: [1]   Go Up
Print
« previous topic   next topic »
 
Jump to: