Pages: [1]   Go Down
Author Topic: Arduino programmer  (Read 914 times)
0 Members and 1 Guest are viewing this topic.
Italy
Offline Offline
Newbie
*
Karma: 0
Posts: 3
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

Hello,

I am writing on this forum hoping someone has a solution to my problem.
I will try to explain here below, briefly and, I hope, clearly, the project that I have to realize and the problem.

Project
I need to create a system that detect atmospheric data by sensors and transmit them via GPRS / GSM.
To do this, I "assembled" an Arduino Uno and a GPRS / GSM shield model "Hilo Sagem."
At the moment, the Arduino is programmed to receive and convert the data received by the sensors into data packages for the GPRS / GSM Shield, and GPRS / GSM shield is programmed to send data packagets.

Problem
The GPRS / GSM shield fails to send multiple packages in series; after sending the first package, the GPRS / GSM shield enters in stand-by mode (stand-by mode is required for energy saving) and it cannot longer be reactivated to send the next package.

Need
I am looking for a programmer who is familiar with the "Arduino world" and that can:
- correct the software (software carried out with “AT command”) and provide "advices" for future issues
- carry out a proper software from zero also with other components.

Obviously these activities will be rewarded (compensation to be agreed).

Please contact me to arduinoprogramming@gmail.com

Thanks in advance
Ciao
Matias
Logged

Gosport, UK
Offline Offline
Faraday Member
**
Karma: 21
Posts: 3113
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

Please don't cross-post. This should be in Gigs and Collaborations - http://arduino.cc/forum/index.php/board,26.0.html.
Logged

Global Moderator
Offline Offline
Brattain Member
*****
Karma: 473
Posts: 18695
Lua rocks!
View Profile
WWW
 Bigger Bigger  Smaller Smaller  Reset Reset

Thread moved. Please don't cross-post like that. Four copies is three too many.
Logged

Pages: [1]   Go Up
Jump to: