Go Down

Topic: Need some help with time a date. (from internet) (Read 3063 times) previous topic - next topic


I have been unsuccessful using several examples that get the time and date from an internet time server.

This is what I am trying to do:
get time and date from an internet time server, and use the day of the week and time of the day to determine if an action will happen.

Also once arduino has the time how well can it keep it without a external reference.  I dont mind it rechecking once every 24hrs, but would rather not have it ask every loop.

Some sample code on getting the time that works would be nice.


More specifically:
Code: [Select]
if (day == saturday || day == sunday){
digitalWrite(LED1, HIGH);
        digitalWrite(LED1, LOW);

if(time >= 13){  //unclear on what the time format will be
digitalWrite(LED1, HIGH);
        digitalWrite(LED1, LOW);


Capacitor Expert By Day, Enginerd by night.  ||  Personal Blog: www.baldengineer.com  || Electronics Tutorials for Beginners:  www.addohms.com


the one I found did not work...
I will post it, I must have something wrong.


Test code modified to get the time when a g is sent to the arduino via the serial monitor.

Code: [Select]

//zoomkat 12-08-11, combined client and server
//simple button GET with iframe code
//for use with IDE 1.0
//open serial monitor and send an g to test client and
//see what the arduino client/server receives
//web page buttons make pin 4 high/low
//use the \ slash to escape the " in the html
//address will look like when submited
//for use with W5100 based ethernet shields

//NTP server implementation added by RobertJP

#include <SPI.h>
#include <Ethernet.h>
#include <EthernetUdp.h>

byte mac[] = { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED }; //physical mac address
IPAddress ip(192,168,1,102); // ip in lan
IPAddress gateway(192,168,1,1); // internet access via router
IPAddress subnet(255,255,255,0); //subnet mask
IPAddress myserver(208,104,2,86); // zoomkat web page
EthernetServer server(84); //server port
EthernetClient client;
String readString;

//////////////////////NTP declarations
IPAddress timeServer(77,245,91,218); // time.nist.gov NTP server
const int NTP_PACKET_SIZE= 48; // NTP time stamp is in the first 48 bytes of the message
byte packetBuffer[ NTP_PACKET_SIZE]; //buffer to hold incoming and outgoing packets
EthernetUDP Udp; // A UDP instance to let us send and receive packets over UDP
unsigned int localPort = 8888; //Port to listen for UDP packets

void setup(){
  pinMode(5, OUTPUT); //pin selected to control
  Serial.println("server/client 1.0 test 12/08/11"); // keep track of what is loaded
  Serial.println("Send an g in serial monitor to test client"); // what to do to test client
  Serial.println("UDP started");

void loop(){
  // check for serial input
  if (Serial.available() > 0)
    byte inChar;
    inChar = Serial.read();
    if(inChar == 'g')
      sendGET(); // call sendGET function

  EthernetClient client = server.available();
  if (client) {
    while (client.connected()) {
      if (client.available()) {
        char c = client.read();

        //read char by char HTTP request
        if (readString.length() < 100) {

          //store characters to string
          readString += c;

        //if HTTP request has ended
        if (c == '\n') {

          Serial.println(readString); //print to serial monitor for debuging

            //now output HTML data header
          if(readString.indexOf('?') >=0) { //don't send new page
            client.println("HTTP/1.1 204 Robert");
          else {
            client.println("HTTP/1.1 200 OK"); //send new page
            client.println("Content-Type: text/html");

            client.println("<TITLE>Arduino GET test page</TITLE>");

            client.println("<H1>Zoomkat's simple Arduino 1.0 button</H1>");

            client.println("<a href=\"/?on\" target=\"inlineframe\">ON</a>");
            client.println("<a href=\"/?off\" target=\"inlineframe\">OFF</a>");

            //client.println("<IFRAME name=inlineframe src=\"res://D:/WINDOWS/dnserror.htm\" width=1 height=1\">");
            client.println("<IFRAME name=inlineframe style=\"display:none\" >");         


          //stopping client

          ///////////////////// control arduino pin
          if(readString.indexOf("on") >0)//checks for on
            digitalWrite(5, HIGH);    // set pin 4 high
            Serial.println("Led On");
          if(readString.indexOf("off") >0)//checks for off
            digitalWrite(5, LOW);    // set pin 4 low
            Serial.println("Led Off");
          //clearing string for next read


void sendGET()
  Serial.println("Send GET");
  sendNTPpacket(timeServer); // send an NTP packet to a time server
   // wait to see if a reply is available
  if ( Udp.parsePacket() ) {
    Serial.println("Got it!");
    // We've received a packet, read the data from it
    Udp.read(packetBuffer,NTP_PACKET_SIZE);  // read the packet into the buffer

    //the timestamp starts at byte 40 of the received packet and is four bytes,
    // or two words, long. First, esxtract the two words:

    unsigned long highWord = word(packetBuffer[40], packetBuffer[41]);
    unsigned long lowWord = word(packetBuffer[42], packetBuffer[43]); 
    // combine the four bytes (two words) into a long integer
    // this is NTP time (seconds since Jan 1 1900):
    unsigned long secsSince1900 = highWord << 16 | lowWord; 
    Serial.print("Seconds since Jan 1 1900 = " );

    // now convert NTP time into everyday time:
    Serial.print("Unix time = ");
    // Unix time starts on Jan 1 1970. In seconds, that's 2208988800:
    const unsigned long seventyYears = 2208988800UL;     
    // subtract seventy years:
    unsigned long epoch = secsSince1900 - seventyYears; 
    // print Unix time:

    // print the hour, minute and second:
    Serial.print("The UTC time is ");       // UTC is the time at Greenwich Meridian (GMT)
    Serial.print(1+(epoch  % 86400L) / 3600); // print the hour (86400 equals secs per day)
    if ( ((epoch % 3600) / 60) < 10 ) {
      // In the first 10 minutes of each hour, we'll want a leading '0'
    Serial.print((epoch  % 3600) / 60); // print the minute (3600 equals secs per minute)
    if ( (epoch % 60) < 10 ) {
      // In the first 10 seconds of each minute, we'll want a leading '0'
    Serial.println(epoch %60); // print the second

// send an NTP request to the time server at the given address
unsigned long sendNTPpacket(IPAddress& address)
  // set all bytes in the buffer to 0
  memset(packetBuffer, 0, NTP_PACKET_SIZE);
  // Initialize values needed to form NTP request
  // (see URL above for details on the packets)
  packetBuffer[0] = 0b11100011;   // LI, Version, Mode
  packetBuffer[1] = 0;     // Stratum, or type of clock
  packetBuffer[2] = 6;     // Polling Interval
  packetBuffer[3] = 0xEC;  // Peer Clock Precision
  // 8 bytes of zero for Root Delay & Root Dispersion
  packetBuffer[12]  = 49;
  packetBuffer[13]  = 0x4E;
  packetBuffer[14]  = 49;
  packetBuffer[15]  = 52;

  // all NTP fields have been given values, now
  // you can send a packet requesting a timestamp:         
  Udp.beginPacket(address, 123); //NTP requests are to port 123

Google forum search: Use Google Search box in upper right side of this page.
Why I like my 2005 Rio Yellow Honda S2000  https://www.youtube.com/watch?v=pWjMvrkUqX0


Thanks for the code!
It have all the parts I need in one working example  :smiley-mr-green:

Had to load it three time before it would work...  :~
Maybe the other example would also work it I loaded it several times.


Had to load it three time before it would work...

Why? The code either compiles, links, uploads, and executes, or it doesn't. Performing the same steps, without any changes, expecting different results is the definition of insanity.
The art of getting good answers lies in asking good questions.


Had to load it three time before it would work...

Why? The code either compiles, links, uploads, and executes, or it doesn't. Performing the same steps, without any changes, expecting different results is the definition of insanity.

I have no idea... But I do know It did not work the first three times. I just got "Done" I tried changing the wait time for it to get a response from the time server but on the third time put the same value it started with in.  That time when I uploaded it it worked.  Having worked with computers long enough, I have come to find that sometimes things just do screw up.  After all if they did not you would not need a reset button.  :D

Go Up