Pages: [1]   Go Down
Author Topic: 3-axis accelerometer, bluetooth  (Read 1359 times)
0 Members and 1 Guest are viewing this topic.
Offline Offline
Newbie
*
Karma: 0
Posts: 16
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

I am trying to make a device which has a 3-axis accelerometer and is capable of bluetooth communication. The device will be by itself and will be mainly performing data acquisition. Any suggestions?
Logged

Offline Offline
Sr. Member
****
Karma: 1
Posts: 486
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

what sort of distance would you have between the logger and the data receiver? what will be receiving the data?

my guess would be an Arduino, Xbee or bluetooth module and a 3axis accel from sparkfun.
Logged

http://dduino.blogspot.com all my Arduino/electronic projects!!!

{NEW} Getting Started, Learning, Reference + FAQ PDF!!:
[url]http://ar

Offline Offline
Newbie
*
Karma: 0
Posts: 16
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

So I found these http://www.seeedstudio.com/depot/bluetooth-bee-standalone-p-1157.html?cPath=139_142 and https://www.sparkfun.com/products/11028 is it possible to connect these two together and then send data to a computer with the bluetooth?

Alternatively what I was thinking was http://www.seeedstudio.com/depot/bluetooth-low-energy-shield-p-1255.html?cPath=132_134 and the same accelerometer from above. However which arduino board would be best suited for this.
Logged

Offline Offline
Sr. Member
****
Karma: 1
Posts: 486
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

the first two would work fine. you'd just need some soldering.

the second one will work fine with a regular arduino uno. also needs soldering for the imu wires
Logged

http://dduino.blogspot.com all my Arduino/electronic projects!!!

{NEW} Getting Started, Learning, Reference + FAQ PDF!!:
[url]http://ar

Pages: [1]   Go Up
Jump to: