Pages: [1]   Go Down
Author Topic: Best way to control 64x64 rgb leds?  (Read 509 times)
0 Members and 1 Guest are viewing this topic.
Offline Offline
Karma: 0
Posts: 29
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

How would i go about performing this with an arduino? I have an uno, would I have to use shift registers? Multiple arduinos? I really don't know where to begin.

Many thanks for any help at all,

« Last Edit: September 26, 2012, 02:38:45 am by samwhiteUK » Logged

Massachusetts, USA
Offline Offline
Tesla Member
Karma: 212
Posts: 8975
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

You will almost certainly need shift registers, and lots of them!

You either need 12288 outputs (1536 8-bit shift registers) or you need a multiplexed array (say, 32x384 LEDs or 4+48 8-bit shift registers) or maybe you can use 8x8 modules (64 of them) each with three 8x8 driver chips.

Send Bitcoin tips to: 1L3CTDoTgrXNA5WyF77uWqt4gUdye9mezN
Send Litecoin tips to : LVtpaq6JgJAZwvnVq3ftVeHafWkcpmuR1e

Pages: [1]   Go Up
Jump to: