next topic »

[on:]

Hello,

I have two lcd display that I got back on ip phone : Linksys SPA922 and Cisco SPA502G.
These two display are the same, 128X64 pixels.
There are 34 pins.

I found on the cable :
ES50882FLW
09081A-AOG

40-90080-5
EDT REV.A
EP QTHD0931
94V-0 E305211

on the display :

BLD3016W(50-20334-0A)
SYE9806E6699

here is a photo : http://postimage.org/image/emquzcxa9/

Can somenone help me to identify the pinout and how to wire with an arduino ?

Thanks in advance.

Flop

[Reply #1 on:]

Personally I think that supplying the connectors and possible the drivers will be a great deal more cost than the $22.00 shield and 3.2" tft display sold by Electrogragon. The 3.2 display is made by Itead and I have 2 of them in front of me working perfectly, a 2.4" and a 3.2" 65K color display and the library UTFT by Henning Karlsen works very well with both. I have some years of electronics experience and I wouldn't attempt it... Not without a Kit of parts and clear instruction.

Bob