Go Down

Topic: Error Uploading Program Into Arduino UNO (Read 1 time) previous topic - next topic

anepzamri

Hi guys,

I have an arduino UNO board with ATMEGA328 chip on it, i want to use the chip off board, means i will plug out the chip and put it into pcb,

but, while doing that i broke one of the chip leg,  :~ ,

so i bought a new one, the same ATMEGA328 chip and plug it into arduino board to upload the program,

but i cant, as i always get this error, avrdude: stk500_getsync(): not in sync: resp=0x00

can anyone please help me on this?  :~

Thanks!

spcomputing

Did you purchase an Atmega328p with Optiboot or other bootloader?
http://www.spcomputing.com

anepzamri

im not sure, but i think its a bare chip..

spcomputing

You are going to need a AVR programmer or a working Arduino w/ bootloader.  Which pin did you break?  Do you have a breadboard?
http://www.spcomputing.com

anepzamri

i have another working arduino, so i tried bootlader the chip between 2 arduino uno board, like this:
http://arduino.cc/en/Tutorial/ArduinoISP

but the program gave me error not sync while i try burn bootloader at step 7,

Please help me out.. thank you very much ,

spcomputing

Just hook things up like the pictures and upload Atmega Board Programmer:
http://www.gammon.com.au/forum/bbshowpost.php?bbsubject_id=11635

Then open the serial monitor @ 115200 baud.
http://www.spcomputing.com

anepzamri

i got it now guys,! Thank you so much!  :D

Go Up
 


Please enter a valid email to subscribe

Confirm your email address

We need to confirm your email address.
To complete the subscription, please click the link in the email we just sent you.

Thank you for subscribing!

Arduino
via Egeo 16
Torino, 10131
Italy