Go Down

Topic: Error Uploading Program Into Arduino UNO (Read 1 time) previous topic - next topic

anepzamri

Hi guys,

I have an arduino UNO board with ATMEGA328 chip on it, i want to use the chip off board, means i will plug out the chip and put it into pcb,

but, while doing that i broke one of the chip leg,  :~ ,

so i bought a new one, the same ATMEGA328 chip and plug it into arduino board to upload the program,

but i cant, as i always get this error, avrdude: stk500_getsync(): not in sync: resp=0x00

can anyone please help me on this?  :~

Thanks!

spcomputing

Did you purchase an Atmega328p with Optiboot or other bootloader?
http://www.spcomputing.com

anepzamri

im not sure, but i think its a bare chip..

spcomputing

You are going to need a AVR programmer or a working Arduino w/ bootloader.  Which pin did you break?  Do you have a breadboard?
http://www.spcomputing.com

anepzamri

i have another working arduino, so i tried bootlader the chip between 2 arduino uno board, like this:
http://arduino.cc/en/Tutorial/ArduinoISP

but the program gave me error not sync while i try burn bootloader at step 7,

Please help me out.. thank you very much ,

spcomputing

Just hook things up like the pictures and upload Atmega Board Programmer:
http://www.gammon.com.au/forum/bbshowpost.php?bbsubject_id=11635

Then open the serial monitor @ 115200 baud.
http://www.spcomputing.com

anepzamri

i got it now guys,! Thank you so much!  :D

Go Up