Go Down

Topic: motor shield help (Read 2088 times) previous topic - next topic


i am trying to build my own robot from scratch i picked up a motor shield from radio shack
and was wondering has any one worked with seeed studio motor shield before. how do i go about useing
this with arduino. what do i all need to know?

thanks in advance. 


do we talk about this shield?

Its a standard L293N motordriver board with clever extras. You can power the arduino from the onboard 5V regulator plus you have lots of unused pins for extra sensors.
Only thing is: the motors should be capable of 6-15V.
It's not my fault when my Posts are full of Errors. This stupid autocorrection from my browser is set up for german grammar.


I have the Seeed motor shield. There is no way of connecting anything but motors and sensors to it. I have the Maker Shield and I can't plug it on top of the seeed motor shield. If I plug the motor shield on top of the Maker Shield, how can I connect wires to the black headers?

Go Up

Please enter a valid email to subscribe

Confirm your email address

We need to confirm your email address.
To complete the subscription, please click the link in the email we just sent you.

Thank you for subscribing!

via Egeo 16
Torino, 10131