Go Down

Topic: Making a Bootloader for the AT90CAN32 (Read 1 time) previous topic - next topic

Has anyone used the AT90CAN32 with the Arduino bootloader?

   I have used the AT90CAN128 for several years now, and would like to use the AT90CAN32 now.  I have tried to make a new bootloader using the AT90CAN128 and changing the specifics form AT90CAN128 to AT90CAN32 in the "Makefile" and the Atmega_168_BOOT.c file and get an error.

avr-gcc -g -Wall -O2 -mmcu=at90can32 -DF_CPU=16000000L  '-DMAX_TIME_COUNT=F_CPU>
>4' '-DNUM_LED_FLASHES=2'   -c -o AT90CAN_BOOT.o AT90CAN_BOOT.c
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp/ccRV4OHF.s: Assembler messages:
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp/ccRV4OHF.s:998: Error: illegal opcode elpm for mcu at90can32
make: *** [AT90CAN_BOOT.o] Error 1

Hope someone can help.

Thanks

--Tim

Coding Badly


Is the ELPM instruction listed in the at90can32 datasheet?

Yes, the ELPM instructions are listed.  I am able to use the makefile now and get the bootloader in the chip. 

Thanks

--Tim

Coding Badly


pioca

I want to use the AT90CAN32 with Arduino, too.
Nothing special. Just playing with som CAN frames.
Do you see a chance to share the bootloader ?

funkyguy4000

Accelerate to 88 miles per hour.

NI$HANT

Yes please same here , can you share the Bootloader?
"Real Men can Accomplish  Anything"

- skype : nishants5  

ਫ਼ਤੇਹ ਕਰੁਂ!

Go Up
 


Please enter a valid email to subscribe

Confirm your email address

We need to confirm your email address.
To complete the subscription, please click the link in the email we just sent you.

Thank you for subscribing!

Arduino
via Egeo 16
Torino, 10131
Italy