Go Down

Topic: Arduino MEGA 2560 R3 : avrdude: stk500v2_command(): unknown status 0xc8 (Read 1 time) previous topic - next topic


hi everyone,

i'm new to this topic as i'm new to arduino.i've read a lot about it and finally i've ordered one .

i've opted for the Mega 2560 R3. so i downloaded 1.0.1 version of the arduino software from arduino.cc .

i installed correctly the drivers and started with the classic "Blink sketch" .

when i hit the upload button, it starts uploading then i finally have "Done uploading". it is supposed to be OK.

but as i'm suspicious by nature,i activated the verbose mode when uploading and i have this message :

Binary sketch size: 1 420 bytes (of a 258 048 byte maximum)
avrdude: stk500v2_command(): unknown status 0xc8
avrdude: initialization failed, rc=-1
         Double check connections and try again, or use -F to override
         this check.

avrdude: stk500v2_command(): unknown status 0x01
avrdude: stk500v2_disable(): failed to leave programming mode

and of course,the led doesn't blink as expected .

anyone that can help me please ???

thank you !


Same error please tell me if you have now solution of this problem.

Go Up

Please enter a valid email to subscribe

Confirm your email address

We need to confirm your email address.
To complete the subscription, please click the link in the email we just sent you.

Thank you for subscribing!

via Egeo 16
Torino, 10131