Go Down

Topic: how to go to STM32 / Arm (Read 5 times) previous topic - next topic

fat16lib

I suggest you try Teensy 3.0 http://www.pjrc.com/store/teensy3.html also http://www.kickstarter.com/projects/paulstoffregen/teensy-30-32-bit-arm-cortex-m4-usable-in-arduino-a.

I have one and it uses the Arduino IDE with gnu ARM tools.  It's real easy to use.  You just unzip the IDE like the standard Arduino IDE.

Soon, October 22, Arduino will release the Due http://hackadaycom.files.wordpress.com/2012/10/due.pdf.  I suspect it will also be easy to install and use.

avenue33

I also recommend the LaunchPad Stellaris from Texas Instruments.

It features a LM4F-ARM with FPU, 256KB of flash and 32 KB of RAM, for USD13.

Among the many development tools, Energia is a fork of Arduino.

Learn more:


westfw

Does energia support the Arm launch pad?

avenue33

Sure, Energia supports LaunchPad MSP430 and LaunchPad ARM-based Stellaris.

tronixstuff


Sure, Energia supports LaunchPad MSP430 and LaunchPad ARM-based Stellaris.


yes, it works quite well. For example:
http://tronixstuff.wordpress.com/?s=energia
Check out my Arduino tutorials at http://tronixstuff.com/tutorials - Order my  Arduino book from http://nostarch.com/arduino

Go Up