Pages: [1]   Go Down
Author Topic: Need help to identify LCD pin  (Read 1005 times)
0 Members and 1 Guest are viewing this topic.
Offline Offline
Newbie
*
Karma: 0
Posts: 4
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

Hello,

I have two lcd display that I got back on ip phone : Linksys SPA922 and Cisco SPA502G.
These two display are the same, 128X64 pixels.
There are 34 pins.

I found on the cable :
ES50882FLW
09081A-AOG

40-90080-5
EDT REV.A
EP QTHD0931
94V-0 E305211

on the display :

BLD3016W(50-20334-0A)
SYE9806E6699

here is a photo : http://postimage.org/image/emquzcxa9/

Can somenone help me to identify the pinout and how to wire with an arduino ?

Thanks in advance.

Flop
Logged

Anaheim CA.
Offline Offline
Faraday Member
**
Karma: 47
Posts: 2925
...
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

Personally I think that supplying the connectors and possible the drivers will be a great deal more cost than the $22.00 shield and 3.2" tft display sold by Electrogragon. The 3.2 display is made by Itead and I have 2 of them in front of me working perfectly, a 2.4" and a 3.2" 65K color display and the library UTFT by Henning Karlsen works very well with both. I have some years of electronics experience and I wouldn't attempt it... Not without a Kit of parts and clear instruction.

Bob
Logged

--> WA7EMS <--
“The solution of every problem is another problem.” -Johann Wolfgang von Goethe
I do answer technical questions PM'd to me with whatever is in my clipboard

Pages: [1]   Go Up
Jump to: