Go Down

Topic: DS 1307 stays behind in time day by day... (Read 6189 times) previous topic - next topic

Jack Christensen

This story seems appropriate here. The contractor was the dad of someone I used to work with...

"Man with watch always know what time it is. Man with two watches never quite sure."


Do you have any ideas on how I can synchronize my RTC with my PC system time?

Be careful. It's a very slippery slope you're on...



You should check your crystal frequency. I believe the DS1307 uses the external 32.768kHz crystal. These are temperature sensitive and the cheaper ones tend to be less accurate.
There are better TXCO with a self heated or stabilized reference. You might use a trim capacitor on X1 or X2 to trim the frequency. You might just swap out the crystal and get better (or worse) synchronization. I hope this helped.

Go Up

Please enter a valid email to subscribe

Confirm your email address

We need to confirm your email address.
To complete the subscription, please click the link in the email we just sent you.

Thank you for subscribing!

via Egeo 16
Torino, 10131