Go Down

Topic: Voice Recognition Module programming issue (Read 4 times) previous topic - next topic

Rustie0125

Okay this toke me while now.

when the VR module is in common mode i get the following in Serial monitor

Group1 Imported !
Common Mode
Result:12
Result:14
Result:11
Result:13
Result:15
Result:12

then When in Compact mode I get



thats all  even when i speak there is no other output on the serial monitor

He who does not try ,does not fail ,does not learn not to fail again http://powerduino.blogspot.com/

Rustie0125

UPDATE: the " Ì " is HEX for "cc" whichin compact mode means " successfully setup compact mode"
He who does not try ,does not fail ,does not learn not to fail again http://powerduino.blogspot.com/

Rustie0125

Hi Paul

thanx for your help I got the unit to work as intended , and i let the supplier know that there example code does not work, next step is to program a better library to be able to do word learning via arduino without a PC

will post a video later when in better working order
He who does not try ,does not fail ,does not learn not to fail again http://powerduino.blogspot.com/

PaulS

Quote
I got the unit to work as intended

That's great.

Rustie0125

Hi Paul

Im onto the next issue now but im looking for an idea of how to do it rather then a the way im doing it now.

there is two things i need help with.

1) i have my VR module now truning on a LED when i say "red" and they off when i say " off" but this takes up an extra command for one action as in on and of for one LED , i want to do StateChangeDetection with the word "red" so when i say red the led goes high and when i say red again the "led" goes "low" my problem is the statechangedetection reads from a pin which i dont have in the software. how do i go about this ? i know i can run a wire from the red light to another input and just read the input if its high or low but thats wasting pins.

2) How do i program the unit to go into a specific Case and stay looping in that case untill i give it a command to exit back to the main program? currently it keeps reverting back to the top of the code.
He who does not try ,does not fail ,does not learn not to fail again http://powerduino.blogspot.com/

Go Up