Go Down

Topic: Arduino and Phidgets 1129 sensor (Read 973 times) previous topic - next topic

Pilot

HI!
Please, help me: I would like to make a simple Arduino interface for ten Phidgets 1129 capacitive sensors.
The interface will be connect to a windows PC . The PC monitor, simply show what sensor where activated.
Can you help me? I have many doubts because is my first approach with Arduino...
Thank you!

PaulS

Quote
Can you help me?

Sure, if you provide a link to the sensor in question.

What good will it do to have the sensor info as text in the Serial Monitor application?

Pilot

http://www.phidgets.com/products.php?product_id=1129

The goal is a didattic application with 10 sensors and a PC monitor that show the condition "off" and "on" of a single sensor.
Thank you!


PaulS

Have you connected the sensors to the Arduino? To which pins? The device can be read using analogRead(), if connected to an analog pin or digitalRead() if connected to a digital pin.

Writing what was read to the serial port is trivial.

Pilot

I am afraid. I did not explain myself well. I must still to make the project and don't know the ARDUINO platform and don't know as programmed. I am looking for anyone who can advise me to get in order or at least provide me with the necessary software.
Thank you|

PaulS

Quote
I am looking for anyone who can advise me to get in order or at least provide me with the necessary software.

But, you can't be bothered answering questions?

Please re-read the previously replies, and make sure that you have answered all the questions.

Go Up