Go Down

Topic: cycling 4 LEDs at varrying speeds (Read 17541 times)previous topic - next topic

AWOL

#15
Oct 08, 2012, 08:34 pm
Quote
I would much rather understand it at a pace that I can see results with what I have.
you registered this username at ten to five.
It is now just after seven.
How many of the IDE examples have you worked through?
"Pete, it's a fool (who) looks for logic in the chambers of the human heart." Ulysses Everett McGill.
Do not send technical questions via personal messaging - they will be ignored.
I speak for myself, not Arduino.

JeffCoalfax

#16
Oct 08, 2012, 08:49 pm
quite a few, I spent just about my entire weekend trying to come up with something and I know that I'm frustrated to the point that I enlisted the help of the arduino community. I tried playing with quite a few IDE but I can't bridge the gap to applying it to what I have, I always get errors and can't figure out why (which isn't a far stretch).

There are a lot of things that I'm good at but this isn't one of them. Please help me...

AWOL

#17
Oct 08, 2012, 08:53 pm

Get a clock, a pencil and a sheet of paper.

I want you to boil an egg for three minutes, another for four and another for five.

Oh, and you have the memory of a goldfish.
"Pete, it's a fool (who) looks for logic in the chambers of the human heart." Ulysses Everett McGill.
Do not send technical questions via personal messaging - they will be ignored.
I speak for myself, not Arduino.

JeffCoalfax

#18
Oct 08, 2012, 09:07 pm
Wow!! Is a moderator seriously insulting me?
Unless this is your way of trying to teach me something, I would expect more from a moderator.

here it is in easy to understand terms:

start by chasing each other one after the other at the rate of XX cycles per minute (cpm).
the chasing increases at the rate of XX cycles per second (cps) until it reaches XX cpm
once that cpm is met then it decreases speed by XX cps until XX cpm are met.
It does this over and over and over and over again.

That's the goal I'm trying to achieve here.

Is it simple to do?

If boiling eggs for 3,4,5 minutes is supposed to mean something explain it to me...

AWOL

#19
Oct 08, 2012, 09:11 pmLast Edit: Oct 08, 2012, 09:17 pm by AWOL Reason: 1
Quote
Wow!! Is a moderator seriously insulting me?

Certainly not. I set out the conditions of a well understood (I hope) task, as an analogy of the blink without delay example.
Where's the insult?

Quote
Is it simple to do?

Yes.
Will I write it for you?
No.

We operate on the "teach a man to fish" principle.
"Pete, it's a fool (who) looks for logic in the chambers of the human heart." Ulysses Everett McGill.
Do not send technical questions via personal messaging - they will be ignored.
I speak for myself, not Arduino.

JeffCoalfax

#20
Oct 08, 2012, 09:20 pm
Quote
Oh, and you have the memory of a goldfish.

I get it, "who is this guy that just started an account and expects us to help him?" I'm hoping for some real help, not links to other projects that may work, if I know what and how to extract and apply it here I would but like I said that's not how I learn.

What I'm hoping for is:
"here try this simple code: [code ] [code/ ]
see how the xx changes as you change xx? Try xx and see how xx speeds up and xx slows down, that is xx at it's simplest form"

I understand that analogy but how does it apply?

JeffCoalfax

#21
Oct 08, 2012, 09:26 pm

Quote

Quote
Is it simple to do?

Yes.
Will I write it for you?
No.

We operate on the "teach a man to fish" principle.

I can see that's how you operate, tossing links at me isn't teaching me anything that google search can teach me. I'm willing to bet that there are others on this forum that see my frustration and will teach me to fish in a manner that I'm willing to learn.

AWOL

#22
Oct 08, 2012, 09:29 pm
Quote
What I'm hoping for is:
"here try this simple code:

As I said earlier, the blink without delay example has about four significant lines.
What about it do have problems with?

"Pete, it's a fool (who) looks for logic in the chambers of the human heart." Ulysses Everett McGill.
Do not send technical questions via personal messaging - they will be ignored.
I speak for myself, not Arduino.

JeffCoalfax

#23
Oct 08, 2012, 09:34 pm
And that's what I don't understand, the blink is constant, how do I make it vary? and how do I apply that to what I have. I don't ubnderstand any of it.

AWOL

#24
Oct 08, 2012, 09:36 pm
By changing the value of "interval"
"Pete, it's a fool (who) looks for logic in the chambers of the human heart." Ulysses Everett McGill.
Do not send technical questions via personal messaging - they will be ignored.
I speak for myself, not Arduino.

JeffCoalfax

#25
Oct 08, 2012, 09:52 pm
Yes I can see how I can manually change the interval But I want to do it automatically.

AWOL

#26
Oct 08, 2012, 09:59 pmLast Edit: Oct 08, 2012, 10:18 pm by AWOL Reason: 1
Have your program do it for you. That's about as close to automatic as you're going to get.
Code: [Select]
` unsigned long currentMillis = millis();   if(currentMillis - previousMillis > interval) {    // save the last time you blinked the LED     previousMillis = currentMillis;       // if the LED is off turn it on and vice-versa:    if (ledState == LOW)      ledState = HIGH;    else      ledState = LOW;    // set the LED with the ledState of the variable:    digitalWrite(ledPin, ledState);  }`

Breaks down to:
Look at the time
Is it time to do something?
If so, do something

Where "do something" can include change the amount of time until I next have to do something.
"Pete, it's a fool (who) looks for logic in the chambers of the human heart." Ulysses Everett McGill.
Do not send technical questions via personal messaging - they will be ignored.
I speak for myself, not Arduino.

PaulS

#27
Oct 08, 2012, 10:19 pm
Quote
But I want to do it automatically.

You have our permission. If you need help with that, you must define when/under what conditions to change the value, and how much to change it by.

JeffCoalfax

#28
Oct 09, 2012, 01:37 am
I had to walk away from it right now I'm not at home so I will take a look at it when I get home thanks

#29