Go Down

Topic: Identifying the respective pin numbers of a USB to DB9 male adapter (Read 998 times) previous topic - next topic

darkestz

Hi, I am a COMPLETE novice at this and I want to find out which part of the DB9 male goes to pin 1, 2, 3 etc. and which one is gnd and such. How do I start out? Thanks!

PaulS

Quote
How do I start out?

0.26 seconds with google. "DB9 pinout".

retrolefty

Or google DE-9 and look at images:

http://www.db9-pinout.com/

Lefty


darkestz


well..that was embarassing. thanks people!


wait a minute, I just found out that the DB9 adapter's configuration was jumbled up. The challenge is for us to find out config via serial monitor. Help please? thanks! :) sorry im really a novice hehe

CrossRoads

Typically, pins 2 & 3 are the Rx & Tx pins and 5 is Gnd.
If you look into end of the connector you can usually see pin numbers. 1-2-3-4-5 are all along the "top row" which is the wider part of the connector.
If things aren't talking, switch the wires between 2 & 3.
Designing & building electrical circuits for over 25 years.  Screw Shield for Mega/Due/Uno,  Bobuino with ATMega1284P, & other '328P & '1284P creations & offerings at  my website.

Go Up
 


Please enter a valid email to subscribe

Confirm your email address

We need to confirm your email address.
To complete the subscription, please click the link in the email we just sent you.

Thank you for subscribing!

Arduino
via Egeo 16
Torino, 10131
Italy