Pages: [1]   Go Down
Author Topic: Beta Testers - Arduino - FPGA Shield  (Read 1090 times)
0 Members and 1 Guest are viewing this topic.
Offline Offline
Newbie
*
Karma: 0
Posts: 2
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

Hello,

I am looking for individuals that would be interested in being a beta tester for the FPGA MARK-1.  The FPGA MARK-1 is a highly configurable FPGA platform that is intended to be used as an independent FPGA development board or as an add-on (shield) to existing embedded platforms.  The platforms that the MARK-1 is intended to interface with are: 1) Arduino; 2) Raspberry Pi; and 3) Beagle Bone.   (See link to the FPGA MARK-1 project page for more details on the design.)
http://valentfx.com/prj/fpga-dev/2-mark-1

I took some working prototypes to Maker Faire New York to see what people thought and to get feedback on changes that users would like to see.  I have made some changes including adding interfacing options for the Raspberry Pi and Beaglebone and have added a high speed data port for high bandwidth applications such as SDR (Software Defined Radio), high speed ADC, video, etc.  I am going to be fabricating Beta boards with the changes and would like to have them tested for any required changes before going to production.

I need Beta testers that are proficient in working with the Raspberry Pi, Beaglebone or Arduino.   The users need to have some experience in working FPGA’s.  I would like the users to experiment with the FPGA Mark-1 interfacing options to one of the listed platforms, get some code examples running on the interfacing platform, and give me feedback on any errors in the design or changes that they would like to see based on their experience.  I will supply the users with the FPGA MARK-1 Beta boards and give them a final production unit once fabricated.

I would like to see some existing projects that the users have developed to show that they are proficient in working with one of the listed platforms.  I would also like see some FPGA work to show me that they have some experience in working FPGA’s.  Please email with these items and I will talk to you further about being a Beta tester.

I would be happy to hear from anyone that may have opinion, insight or suggestion that they would like to share.

Michael Jones
mjones@valentfx.com
Logged

Offline Offline
Newbie
*
Karma: 0
Posts: 2
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

I also want clarify that this platform and any hardware or code developed will be open source. I want to make it clear that I am not in this for myself, but to further the ability for users to easily interface between popular embedded platforms and FPGAs.
Logged

Topsham, Vermont USA
Offline Offline
Edison Member
*
Karma: 23
Posts: 1759
... in The Woods In Vermont
View Profile
WWW
 Bigger Bigger  Smaller Smaller  Reset Reset

Hi,

Can you tell us some of the kinds of devices and interfaces that you envision being implemented in the FPGA? 

What specific FPGA chips are you supporting?

What might the final build/buy cost of a FPGA-based Arduino Shield design be?

Tell us more about the development environment. Would designers be writing the FPGA definition in VHDL, or are there more friendly tools?

Many of us don't know much about Field Programmable Gate Arrays, or programmable logic in general.

Thanks, Terry  -- Arduino Weenie, Old Skool Xilinx guy.

Logged

Regards, Terry King terry@yourduino.com  - Check great prices, devices and Arduino-related boards at http://YourDuino.com
HOW-TO: http://ArduinoInfo.Info

Pages: [1]   Go Up
Jump to: