Go Down

Topic: simple audio input for arduino (Read 1 time) previous topic - next topic

Yogpeople

I am in grade 10 electronics and have some experiance with arduino. I am trying to make an equilizer that resembles this http://www.youtube.com/watch?v=___XwMbhV4k (skip to about 1 min) but i cannot get any audio input readings. When i try to get readings with a mic i get 358 and it doesnt move or it shorts and hits 1023 which is max. I am trying to get a rate between 0 and 1023 that goes up with the loudness of the sound. PLS HELP.

HANKENSTIEN

That is pretty cool looking, ive made a single row / double row of 12 leds's for a volume level.
First place i would check is the code, maybe try and ask the person in that video or others like it for their code.
Double check your resistors that their the right value, a quick check is by just visually checking color values.
The only issue I had is that mine would get stuck at a level like half way up(and halfway up would stay light up even with volume down or stereo of even a reset would not fix, I had to disconnect power), or if i maxed it out, it would get stuck their also, I fixed that, with a resistor across the +/- input. but again i was only using 1 or 2 rows of leds,  When I did make another row, and used a crossover from a speaker box so i had a 2 rows lows and mids, and if i had enough parts, i could have used the Highs as another row aswell, but that only gives 3 rows.
For yours Im not sure I would suggest you post your code, and someone may notice something, a simple extra space somewhere, or a wrong value can still compile, but give strange results. Hope this helps some or at least gets you thinking?
Good luck.

Yogpeople

I'm still having issues but can u send me  your schematic and code PLEASE Id really appreciate it 

gateway


I'm still having issues but can u send me  your schematic and code PLEASE Id really appreciate it 


Hi,

I'm no expert on the topic, but I think you could use http://arduino.cc/forum/index.php/topic,8559.0.html as a start.
On the blog refered to there: http://blurtime.blogspot.nl/2010_11_01_archive.html you can find the schematics and source.

Good luck with your project!

Regards Dennis

Go Up
 


Please enter a valid email to subscribe

Confirm your email address

We need to confirm your email address.
To complete the subscription, please click the link in the email we just sent you.

Thank you for subscribing!

Arduino
via Egeo 16
Torino, 10131
Italy