Go Down

Topic: help with wifi-proto (Read 1 time) previous topic - next topic

xangomango

Sorry but i'm new in that and i don't understand how to connect it. Somebody has more information?

pylon

GND to GND, Vcc probably to 3V3 (but this doesn't get clear from the "User Manual" sheet), MISO to pin 12, MOSI to pin 11, SCK to pin 13, INT to pin 2, CS to pin 10, RST to Reset, CE to GND. This is my best guess because your linked sheet does not include much information.

xangomango

this days i have try that this works and i couldn't achieve. In this moment i'm connecting this ports:

CE -> GND
RST -> RESET
CS -> 10
INT -> 8
SCK -> 13
MOSI -> 11
MISO -> 10
BOTH VCC TO 3.3V
GND -> GND

And it doesn't work.
Anyone can help?

Thank you!

pylon

Quote
CS -> 10
MISO -> 10


This cannot work.

And you may destroy your module, I don't know if it's capable of receiving 5V on it's comm pins. You may have to install level converters.

Quote
INT -> 8


The default is pin 2, have you changed the library accordingly?

xangomango

sorry, i mean MISO -> 12. And yes, i changed the library.

I do the steps explain in this site: http://theiopage.blogspot.com.es/2011/10/connecting-mrf24wb0ma-to-arduino.html
And when i do the example that doesn't work.

Thanks you!

Go Up