Go Down

Topic: mega+cmos camera+sim900 gsm module (Read 3732 times) previous topic - next topic

ogah

am working on a project that uses atmega 2650. the project is to capture image from serial cmos camera and send it the mega flash memory, get the picture as mms through sim900 gsm/gprs module to a smartphone. i nd help on the codes

PaulS

Quote
i nd help on the codes

Here's a starter:

Code: [Select]
void setup()
{
}

void loop()
{
}


You just need to fill in a few pieces.

Grumpy_Mike

Sorry I think this project is impossible with an arduino.

Not enough memory, not enough speed, you can't write to the Mega's flash memory from a program.

ogah

am working on a project that will detect the presence in an intruder,snap the person using cmos camera,save the image into mega2560's 256k flash memory and send the picture as mms to a smartphone.
please i need help on the codes.

Coding Badly


I suspect this time around the answers are not going to be much different...
http://arduino.cc/forum/index.php/topic,127880.msg961541.html#msg961541

ogah

how i achieve this project. i want to interface a ttl camera module and sim900 module to an ardunio board. capture image save it in SDcard send it as mms to smartphone through the sim900 module

ogah

how can i use arduino board capture an image from a cmos camera,send it as mms to a smartphone using sim900

dxw00d

That would depend on which cmos camera you had, for a start.

AWOL

Some useful links
http://arduino.cc/forum/index.php/topic,127880.msg961541.html#msg961541
http://arduino.cc/forum/index.php/topic,130303.msg980158.html#msg980158
http://arduino.cc/forum/index.php/topic,130305.msg980164.html#msg980164
"Pete, it's a fool looks for logic in the chambers of the human heart." Ulysses Everett McGill.
Do not send technical questions via personal messaging - they will be ignored.

PeterH

Is this the third time you've asked this question, or the fourth?

Please STOP it.
I only provide help via the forum - please do not contact me for private consultancy.

ogah

hello house, i want to use uno to contorl a cmos camera, my aim is to capture an image and save into the Ram of Uno. i need to know if it is possible and how to do it

AWOL

"Pete, it's a fool looks for logic in the chambers of the human heart." Ulysses Everett McGill.
Do not send technical questions via personal messaging - they will be ignored.

Nick Gammon

How big an image are you planning to capture? In bytes.
Please post technical questions on the forum, not by personal message. Thanks!

More info:
http://www.gammon.com.au/electronics

conradin

I am planning the same thing, but will utilize the SD card memory option.
Though I may also try using a webcam, and try interfacing it.

PeterH

In five posts you have managed to ask the same question five times. Do you see what's wrong with that?
I only provide help via the forum - please do not contact me for private consultancy.

Go Up