Pages: [1]   Go Down
Author Topic: LifeClock - short run kit  (Read 1373 times)
0 Members and 1 Guest are viewing this topic.
Offline Offline
Karma: 3
Posts: 20
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

Since I had the usual stack of leftover PCBs from Seeed, I decided to buy up the parts for the rest of the boards and offer it as a kit on Tindie.  It's a (mostly) Arduino-compatible ATmega328 board with clock & sensors that drives a charlieplexed 10x11 grid of 5mm LEDs.  It's pretty easy to put together, and the default firmware plays Conway's Life between displaying the time & temperature.  The graphics library is fairly complete with support for 7 brightnesses per pixel and the usual line/box/circle drawing routines, although for the most part the basic display is currently just banging pixels to the display directly.  There's a font handler than can scroll text across the display, as well.

Comms are handled through an FTDI header while power is provided over USB or the FTDI connector.

« Last Edit: October 18, 2012, 07:48:16 pm by Coding Badly » Logged

Pages: [1]   Go Up
Jump to: