-tell when it hits the surface from the job and drive out of a capsule
-attach a camera to a servo for a panoramic to take a picture of the capsule
You want to take a picture of the capsule from the capsule?
Me and a group of friends are building a rover for a school project. What I am confused about is what specific parts I would need to complete it. We want it to:
-pick a path away from the capsule (ping sensor)
-2 whell drive
We want this to fit in a 150x100x100 mm box, we can expand it a bit more if we have to. We were thinking of using a Arduino Uno R3 or going smaller and maybe a Arduino mini. Thanks!
Quote from: Prodigy_Snipes on Oct 20, 2012, 11:03 pm-tell when it hits the surface from the job and drive out of a capsuleWell - first you need to know when the capsule is no longer in motion, and you also need to know that the capsule is "upright" (how are you going to ensure this? Even with a parachute, you might not land upright!). Probably a 3-axis accelerometer would be best for this, that way you can measure if you are still in motion, also when you "hit" the surface (a large jolt in acceleration opposite - I believe? - to "down"). You might also want something on the capsule that can tell when surface contact has been made (maybe a simple switch?). Or - if acceleration measurement is too much, look for a "caged ball" sensor to determine "orientation". Using one of those, and some kind of contact sensor switch on the capsule, might be enough to tell you "I am down, and I am upright - open pod bay doors, HAL"...
Please enter a valid email to subscribe
We need to confirm your email address.
To complete the subscription, please click the link in the
email we just sent you.
Thank you for subscribing!
via Egeo 16