Go Down

Topic: Arduino + Xbee + Sensor Communicate to Xbee + PC Problem (Read 9489 times) previous topic - next topic

PaulS

Quote
it was still receive the data" 50...55...13...10...50...55...13...10..."
the correct data should be the temperature "27...27...28..." from the Arduino B +Xbee+ Sensor

You need to look at an ASCII table.

You are getting "27<cr><lf>27<cr><lf>...".

It is up to you to collect the character data and interpret it as integer data, IF that is what it is.
The art of getting good answers lies in asking good questions.

Go Up