Go Down

Topic: 5x7 LED Matrix Issue (Read 4738 times) previous topic - next topic

Sorry, that picture is from when i changed the code for all pins to be HIGH, it is the only thing that makes a difference to the matrix

Grumpy_Mike

Well if all pins are high there should be no LEDs on either so you have still wired it up wrong.

I wired it up as you said with all the corrEct pinouts. 

Grumpy_Mike

You think you have but you have missidintified something.
What is needed is a schematic of what you are trying to acheave, not the sort of thing you have been posting so far and then a clear photograph of what you have done, along with the code you actually run not something like it.
Otherwise how else can we identify what you have wrong.

taipscode

Hey Guy.
Led 5x7 only for children  8)

CrossRoads

taipscode, we don't need comments like that.   Be constructive or keep it to yourself.

Moderator.
Designing & building electrical circuits for over 25 years.  Screw Shield for Mega/Due/Uno,  Bobuino with ATMega1284P, & other '328P & '1284P creations & offerings at  my website.

Go Up