Go Down

Topic: Arduino Tiny library with AVR (Read 381 times) previous topic - next topic

stoopkid

I'd like to put some avr pins on my ATTiny project to program it with my PocketAVR instead of setting up the arduino as ISP, which is annoying to do after a few times. Can I do this and still program it with the arduino IDE and the arduino tiny bootloader? I have done it successfully but only programming it with AVRdude, not the arduino IDE. I suppose the same question goes for the atmega328 and the regular arduino library for programming on a PCB.

Thanks.

Erni

Quote
Can I do this and still program it with the arduino IDE


Yes it is pretty easy, maybe you have to make a new entry in the programmer.txt
I have succesfully used both USBasp programmer and Pololu programmer with the Arduino IDE take a look at this for example.

http://mogshade.wordpress.com/2012/05/05/programming-attiny-13-with-avr-pocket-programmer/

But that was until I learned about TinyISP

http://arduino.cc/forum/index.php/topic,123388.30.html

which makes debugging much easyer

Go Up