Pages: [1]   Go Down
Author Topic: Connecting 9V battery holder to male barrel jack  (Read 2142 times)
0 Members and 1 Guest are viewing this topic.
Offline Offline
Karma: 0
Posts: 1
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

When I got my kit, the barrel connector was not soldered to the battery holder.  Initially, I ignored that since I was connected to my computer.  Now that I am building some projects, I need to use the battery.  I looked on the arduino board and on the connector but can not find anything to show me how to solder the barrel to the holder wires.
Please tell me  which is the negative and which is positive so I do not destroy the board on my first try.

Massachusetts, USA
Offline Offline
Tesla Member
Karma: 212
Posts: 8975
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

The center is +.  The barrel is -.

Don't worry about getting it backward.  There is a protection diode that keeps the current from flowing the other way.

Send Bitcoin tips to: 1L3CTDoTgrXNA5WyF77uWqt4gUdye9mezN
Send Litecoin tips to : LVtpaq6JgJAZwvnVq3ftVeHafWkcpmuR1e

Pages: [1]   Go Up
Jump to: