I was thinking in something like that:http://uk.rs-online.com/web/p/lcd-displays-colour-graphic/7502588/?searchTerm=750-2588&relevancy....<and so forth>
Thanks so much for your answers.The idea it's to use one Atmega for the screen and control panel interface (input buttons) and another ATmega for the motors and internal machine I/O.So with the two ATmega I want to create a NC control system for machines.And NC control it's like a CNC but closed, you don't have the ability to send G code outside, it is all pre-programmed.
I was thinking in something like that:http://uk.rs-online.com/web/p/lcd-displays-colour-graphic/7502588/?searchTerm=750-2588&relevancy-data=636F3D3126696E3D4931384E525353746F636B4E756D6265724D504E266C753D656E266D6D3D6D61746368616C6C26706D3D5E5C647B337D5B5C732D2F255C2E5D5C647B332C347D2426706F3D313426736E3D592673743D52535F53544F434B5F4E554D424552267573743D3735302D323538382677633D4E4F4E4526I don't know if it has the controller/buffer integrated, for what I read yes, but I don't know at what level or if it is useful, I'm not an expert on this matter. XD.
(probably is a problem with the graphic libray: uTFT).
Quote from: BhEaN on Nov 02, 2012, 08:27 pm(probably is a problem with the graphic libray: uTFT).The "problem" is that you have not read the list of supported display modules supplied with UTFT!/Henning
First, thanks for your NO-help...
I read the doc (obviously) before my post, and the controller of my display (SSD1963) is in the list of supported controllers of the UTFT library... so please, the next time, read YOU the list before post this kind of replies...
Quote from: BhEaN on Nov 04, 2012, 02:12 pmI read the doc (obviously) before my post, and the controller of my display (SSD1963) is in the list of supported controllers of the UTFT library... so please, the next time, read YOU the list before post this kind of replies...If you read the documentataion like you say you would have found that the controller is supported but no 7" display modules are supported. You are getting an image on the display so the controller part is obviously working, but the image is not what you expected because your particular display module is NOT supported.Therefore the problem is not with the library.I have put a lot of time and effort into my libraries and do not like it when people like you make unfounded accusations that there are problems with them. All the display modules on the supported-list work just fine. Because there are differences between modules I need to have one of the module in question to add support for it.