Any suggestions as to how to amplify the signal?
By ADC, are you referring to the DAC on the Duo? Does this mean the Duo can't output a constant 1.2345 V signal, for example? Anyone, I think the correct road to go down is using a capacitor as a low-pass filter for the standard PWM. I could get this working first with PWM only, then try to add the filter.
I don't know if the Due can output exactly 1.2345 VDC. However, since it's DAC has 12-bit resolution that means there are 4,096 distinct voltage levels it can output between 0 and 3.3 VDC. So even if it cant output that specific value it can get very close
Or you could use an op-amp based non-inverting amplifier with a voltage gain of about 3.85
That is good enough, it doesn't need to be very close. From the early description of the DAC I thought this might only output a wave, for example, a smooth wave between 0 and 1.2345 V at a specific frequency.
Can you tell me more about this? I am a software guy. I see some very cheap op-amps online, but they all have much larger voltage gains. Also, why 3.85? 3.3V (or 5V) + 3.85V is less than 10V
Can you post an example of an amplifier similar to what might work to give me a better idea?
Please enter a valid email to subscribe
We need to confirm your email address.
To complete the subscription, please click the link in the
email we just sent you.
Thank you for subscribing!
via Egeo 16