Go Down

Topic: Problems with R/C 6ch transmission (Read 4 times) previous topic - next topic


DuaneB

Post the picture here, if we find the right chip, it will be useful for others to follow

Duane B

DuaneB

Ok, it looks like you might have a PPM output on the battery pin.

Write a quick test sketch using pulse in on one of your digital pins and connect the arduino pin to the receiver pin which is nearest the word 'bat'.

If you get a consistent stream of short pulse, you have PPM on that pin.

Duane B

Carlos mononoke

ok here is the photo....

ill try the sketch

DuaneB

This post gets very off topic but seems to suggest that earlier versions of the receiver have PPM on the battery pin (pin nearest bat). Later versions do not.

Yours has ZLH which some people have suggested means it is a later board and does not have PPM, try it anyway, the post is not very clear.

http://9xforums.com/forum/viewtopic.php?f=42&t=1487

Duane B

Go Up