Go Down

Topic: Will these devices compatible with each other? (Read 1 time) previous topic - next topic

gregtom6

Okay, but it can be done with some kind of program what i upload to lilypad, right?

Grumpy_Mike

No you make a wiring change on one of the boards then you modify the code that drives that board.

gregtom6

What do you mean "wiring change on one of the boards"?

gregtom6

Well, I read a bit.
So maybe all of this will be work together. Only needs to manipulate things on the devices. Am I right? Somebody agree or disagree it please.

Grumpy_Mike


What do you mean "wiring change on one of the boards"?

I mean that the shields connect certain signals to certain pins. You will have to change one or more of these.

Take the boards you want, look at the signals they use and see what arduino pins they use. Draw this out and see if any boards need the same pins, they will.
Then look and see if you can change some. That is do they need any special functions that are only mapped to those specific pins. Try to resolve any clashes. Any pins you move you will have to make sure you move both the physical wires and any referance to them in the code or libary.

gregtom6

So if I understand you, I need only to change the wires and rewrite something in the code. Right? So I can order them. Right?
Yes or no? :)

Go Up