Pages: [1]   Go Down
Author Topic: Error in documentation  (Read 531 times)
0 Members and 1 Guest are viewing this topic.
nr Bundaberg, Australia
Offline Offline
Tesla Member
***
Karma: 121
Posts: 8439
Scattered showers my arse -- Noah, 2348BC.
View Profile
WWW
 Bigger Bigger  Smaller Smaller  Reset Reset

On the serial page of the reference

http://arduino.cc/en/Reference/Serial

it states

Quote
Pins 19 and 18 are also connected to the corresponding pins of the ATmega16U2 USB-to-TTL Serial chip

I don't think this is the case. Pins 18/19 are Serial 1, Serial 0 is connected to the USB chip and that's on pins 0 and 1 as per normal.

______
Rob
Logged

Rob Gray aka the GRAYnomad www.robgray.com

Forum Administrator
Milano, Italy
Offline Offline
Sr. Member
*****
Karma: 22
Posts: 292
View Profile
WWW
 Bigger Bigger  Smaller Smaller  Reset Reset

Graynomad,
fixed thanks.
Logged

C.

Pages: [1]   Go Up
Jump to: