Loading...
« previous topic   next topic »
Pages: [1]   Go Down
Author Topic: ATmega328P I2C, SPI to XBee & I/O expander?  (Read 252 times)
0 Members and 1 Guest are viewing this topic.
BlueBill
Toronto, Canada
Offline Offline
Newbie
*
Karma: 0
Posts: 40
View Profile
« on: November 15, 2012, 11:18:58 am »
 Bigger Bigger Smaller Smaller Reset Reset
I'm connecting an ATmega328P, PIC18F26J11 or Rasberry Pi to an I/O extender and I've attached my current I/O map.
The I2C is a SC16IS750 8 bit + UART I2C expander with an interrupt and reset.
RS485/232 is a mode pin set by DIP switch on a MAX3160 (the half/full duplex pin isn't brought to the RPi GPIO)
The XBee is a common XBee radio, the SPI stuff is for the Bluetooth Bee.
1 Wire is an option, PWM might be handy.
Comments, questions welcome. Don't like the I/O choices; I'm listening.
Logged
Bill

Pages: [1]   Go Up
Print
« previous topic   next topic »
 
Jump to: