Go Down

Topic: Huzzah ESP8266  (Read 196 times) previous topic - next topic

alif

My huzzah esp8266 breakout board isn't connecting to my wifi, when i upload the code and open the serial monitor. it only shows this:
Connecting to Orange4575
...
 The full stop goes on & on till i close the serial monitor, below is the code i used.
/*
 *  Simple HTTP get webclient test
 */

#include <ESP8266WiFi.h>

const char* ssid     = "yourssid";
const char* password = "yourpassword";

const char* host = "www.adafruit.com";

void setup() {
  Serial.begin(115200);
  delay(100);

  // We start by connecting to a WiFi network

  Serial.println();
  Serial.println();
  Serial.print("Connecting to ");
  Serial.println(ssid);
 
  WiFi.begin(ssid, password);
 
  while (WiFi.status() != WL_CONNECTED) {
    delay(500);
    Serial.print(".");
  }

  Serial.println("");
  Serial.println("WiFi connected"); 
  Serial.println("IP address: ");
  Serial.println(WiFi.localIP());
}

int value = 0;

void loop() {
  delay(5000);
  ++value;

  Serial.print("connecting to ");
  Serial.println(host);
 
  // Use WiFiClient class to create TCP connections
  WiFiClient client;
  const int httpPort = 80;
  if (!client.connect(host, httpPort)) {
    Serial.println("connection failed");
    return;
  }
 
  // We now create a URI for the request
  String url = "/testwifi/index.html";
  Serial.print("Requesting URL: ");
  Serial.println(url);
 
  // This will send the request to the server
  client.print(String("GET ") + url + " HTTP/1.1\r\n" +
               "Host: " + host + "\r\n" +
               "Connection: close\r\n\r\n");
  delay(500);
 
  // Read all the lines of the reply from server and print them to Serial
  while(client.available()){
    String line = client.readStringUntil('\r');
    Serial.print(line);
  }
 
  Serial.println();
  Serial.println("closing connection");
}


And yes i changed the ssid and password.

SteveToulouse

Does your router (a Livebox maybe?) have MAC filtering enabled?

Go Up