Pages: [1] 2 3   Go Down
Author Topic: sending of spoofing FM signals to a RC car ?  (Read 3303 times)
0 Members and 1 Guest are viewing this topic.
Offline Offline
Newbie
*
Karma: 0
Posts: 30
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

hey guys im working on a RC car and i have hooked the RC receiver up to the arduino and i am able to determine when im holding the throttle and should accelerate, right now im just lighting LED's when im throttling,reversing or just at hault.atm i send the RC signals to the receiver using a hitec RC controller, this works fine, but i would like it to be autonymous and therefore i need to send values to the receiver from the arduino, idk if i have to hook up the FM sender and use it or just connect the arduino to the receiver and send values through the wire directly to the receiver smiley-razz

sorry for my poor English, its not my main language :/

i tried explaining, if u have any questions, just ask smiley
Logged

Queens, New York
Online Online
Faraday Member
**
Karma: 106
Posts: 3772
"Of all the things I've ever lost, I miss my mind the most" -Ozzy Osbourne
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

you can use Bluetooth, RF or Wifi, connect one of those to the TX and RX pins on the arduino and go from there
Logged

Created Libraries:
TFT_Extension, OneWireKeypad, SerialServo, (UPD)WiiClassicController, VWID

Offline Offline
Newbie
*
Karma: 0
Posts: 30
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

yea i could use any of thoose, but as i said i have already hooked the arduino up to the RC receiver that controls the motors, i just need to write the code that makes the arduino spoof an FM signal from the controller, im not going to send a FM signal im just going to send it throught the arduino connection to the receiver, damn its hard to explain xD
Logged

Queens, New York
Online Online
Faraday Member
**
Karma: 106
Posts: 3772
"Of all the things I've ever lost, I miss my mind the most" -Ozzy Osbourne
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

I don't think that could be done, I could be wrong and it might work but I doubt it.
Logged

Created Libraries:
TFT_Extension, OneWireKeypad, SerialServo, (UPD)WiiClassicController, VWID

UK
Offline Offline
Shannon Member
****
Karma: 223
Posts: 12630
-
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

yea i could use any of thoose, but as i said i have already hooked the arduino up to the RC receiver that controls the motors, i just need to write the code that makes the arduino spoof an FM signal from the controller, im not going to send a FM signal im just going to send it throught the arduino connection to the receiver, damn its hard to explain xD

I'm not clear what you want to do.

If you want the Arduino to take signals in from the RC receiver (the signals that would usually go to servos and speed controllers) that is easily done. If you want the Arduino to output the sort of signals needed to control servos and speed controllers, that is also easy.

What you can't do - and I'm not sure whether you're trying to - is make the Arduino simulate the radio signal that would usually come from the RC transmitter. That is not something the Arduino can do - but if you think you need to do that then please explain what you're trying to achieve and perhaps we can suggest a better way to achieve it.
Logged

I only provide help via the forum - please do not contact me for private consultancy.

Left Coast, CA (USA)
Offline Offline
Brattain Member
*****
Karma: 361
Posts: 17303
Measurement changes behavior
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

I think what the OP is asking for is if he can make a arduino generate a PPM message stream modulating FM RF signal generator on the same frequency that his existing R/C receiver is using. That is can he build a arduino based R/C FM transmitter. At least that is my take on it.

Lefty
« Last Edit: November 18, 2012, 01:16:19 pm by retrolefty » Logged

Dubai, UAE
Offline Offline
Edison Member
*
Karma: 22
Posts: 1675
View Profile
WWW
 Bigger Bigger  Smaller Smaller  Reset Reset

My take is that the op has an arduino in the car and would like that arduino to control the car. It is easily done but before we suggest how -

1. Confirm this is what you want

2. Confirm whether the car has proportional control or is it full on, full off type control ?

Duane b

rcarduino.blogspot.com
Logged


Offline Offline
Newbie
*
Karma: 0
Posts: 30
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

well i have the receiver mounted and im receiving values smiley-razz i am currently using a manualy controled joystick to throttle, but i want the arduino to automatically throttle smiley-razz therefore i would need to send a FM signal smiley i can take out the receiver from the joystick and try, but i would like to verify that this is possible first smiley-razz

please link me to anything that could help smiley-wink

basicly making it go by itself(path).
Logged

Queens, New York
Online Online
Faraday Member
**
Karma: 106
Posts: 3772
"Of all the things I've ever lost, I miss my mind the most" -Ozzy Osbourne
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

How will the arduino know how to adjust the throttle? Where is it getting the data to do so.?
The arduino won't do anything unless told to. Unless your talking about a fail-safe in which the arduino will take over when you lose signal, but then how will it know the receiver has lost signal?

I'm confused as to what you want to accomplish with the arduino being automatic.

You have a transmitter and receiver with servos, what will the arduino be doing, what is its purpose?
« Last Edit: November 18, 2012, 02:16:21 pm by HazardsMind » Logged

Created Libraries:
TFT_Extension, OneWireKeypad, SerialServo, (UPD)WiiClassicController, VWID

Offline Offline
Newbie
*
Karma: 0
Posts: 30
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

i want it to be autonymous xD i will code a path for it to drive smiley-razz like this for example

Serial.print("start moving forward")
delay(like 1000 sec or so)
Serial.print("start moving left")
Logged

Queens, New York
Online Online
Faraday Member
**
Karma: 106
Posts: 3772
"Of all the things I've ever lost, I miss my mind the most" -Ozzy Osbourne
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

Oh like a maze bot, ok well do you have sensors, or will it be GPS mapped.
Logged

Created Libraries:
TFT_Extension, OneWireKeypad, SerialServo, (UPD)WiiClassicController, VWID

Offline Offline
Newbie
*
Karma: 0
Posts: 30
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

none of the above xD its not a maze bot, its a path bot, driving a given programmed length
Logged

Queens, New York
Online Online
Faraday Member
**
Karma: 106
Posts: 3772
"Of all the things I've ever lost, I miss my mind the most" -Ozzy Osbourne
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

You could have saved all of us from being confused if you told us exactly what you were doing in the beginning. -_-
Logged

Created Libraries:
TFT_Extension, OneWireKeypad, SerialServo, (UPD)WiiClassicController, VWID

Offline Offline
Newbie
*
Karma: 0
Posts: 30
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

mhm, as i said.. poor english smiley-razz anyways got any idea how to ?
Logged

Queens, New York
Online Online
Faraday Member
**
Karma: 106
Posts: 3772
"Of all the things I've ever lost, I miss my mind the most" -Ozzy Osbourne
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

Sensors!, ultrasonic distance sensor, IR distance sensor, line tracker, or you can physically measure the path by hand.

Your pick.

The arduino needs some input to function, what you want to do required some kind of sensor.
Logged

Created Libraries:
TFT_Extension, OneWireKeypad, SerialServo, (UPD)WiiClassicController, VWID

Pages: [1] 2 3   Go Up
Jump to: