Go Down

Topic: Driving 4 LEDs and 4 Relays with a ULN2803? (Read 759 times) previous topic - next topic

BlueBill

Any thoughts on problems driving (sinking) 4 LEDs on the 5V rail and 4 Relays on the 12V rail with the same ULN2803? (diode clamp on 12V rail)
Bill

johnwasser

Since the 5V and 12V supplies go to the same Ground there should be no problem sinking either or both.
Send Bitcoin tips to: 1L3CTDoTgrXNA5WyF77uWqt4gUdye9mezN
Send Litecoin tips to : LVtpaq6JgJAZwvnVq3ftVeHafWkcpmuR1e

MarkT

Yup, the diodes only needed on the relay windings so that should be fine.  Don't forget current-limiting resistors for the LEDs.
[ I won't respond to messages, use the forum please ]

Go Up