Pages: [1]   Go Down
Author Topic: Ports on Arduino Leonardo  (Read 380 times)
0 Members and 1 Guest are viewing this topic.
Offline Offline
Newbie
*
Karma: 0
Posts: 2
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

Hello,

I'm new to the Arduino world. Currently, I'm using an Arduino leonardo and I'm going to use serial communication. I know the serial communication is done by digital pins 1 and and 0 (TX and RX respectively), but I could not find which ports are activated in the reference sheets for leonardo. Could someone guide me as to where I would find the ports that are activated when I do serial communication. Any help would be appreciated.
Logged

Massachusetts, USA
Offline Offline
Tesla Member
***
Karma: 212
Posts: 8966
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

http://arduino.cc/en/Guide/ArduinoLeonardo

"Separation of USB and serial communication.
On the Leonardo, the main Serial class refers to the virtual serial driver on the Leonardo for connection to your computer over USB. It's not connected to the physical pins 0 and 1 as it is on the Uno and earlier boards. To use the hardware serial port (pins 0 and 1, RX and TX), use Serial1. (See the Serial reference pages for more information.)"
Logged

Send Bitcoin tips to: 1L3CTDoTgrXNA5WyF77uWqt4gUdye9mezN
Send Litecoin tips to : LVtpaq6JgJAZwvnVq3ftVeHafWkcpmuR1e

Pages: [1]   Go Up
Jump to: