... im gonna give this a fair shake and read in detail as a favor to myself to atleast give one more chance ...
Atmega chip programmer.Written by Nick Gammon.Entered programming mode OK.Signature = 0x1E 0x95 0x0F Processor = ATmega328PFlash memory size = 32768 bytes.LFuse = 0xFF HFuse = 0xDE EFuse = 0xFD Lock byte = 0xCF Bootloader address = 0x7E00Bootloader length = 512 bytes.
because i was looking for arduinoisp error fixes not a whole new method of use, when i get done with this other tutorial if it doesnt work i'll give yours a look and try again
Quote from: mysteredding on Nov 25, 2012, 10:17 pmim gonna be hella mad if it doesnt workLikely microcontrollers and electronics in general are not for you.It is self evident you have not read any help page from the beginning to the end. You do not have enough patience.
im gonna be hella mad if it doesnt work
I warn you that I don't have an Atmega8 (I might order one) so that isn't actually tested with one. It did work with all the other chips I tried in the post.