Pages: [1] 2   Go Down
Author Topic: Arduino Due compatible with Arduino Ethernet shield or Arduino Wifi shield ?  (Read 11032 times)
0 Members and 1 Guest are viewing this topic.
Offline Offline
Newbie
*
Karma: 0
Posts: 3
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

Hello Everybody,

Arduino Due is it compatible with Arduino Ethernet shield or Arduino Wifi shield ?

If no, is there a work around ?

Best regards,

Laurent
Logged

Sanger, Texas, USA
Offline Offline
Newbie
*
Karma: 0
Posts: 14
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

The exact question I want answered too.
Since the Due seems to have a 3.3v max while the Arduino wants 5V - I worry about plugging them together.
Logged

Forum Administrator
Milano, Italy
Offline Offline
Sr. Member
*****
Karma: 23
Posts: 292
View Profile
WWW
 Bigger Bigger  Smaller Smaller  Reset Reset

They are both compatible.

For the Wifi shield, the library is still missing, so you can't still use it (unless you port the library by yourself). I'm working on it.
Logged

C.

Sanger, Texas, USA
Offline Offline
Newbie
*
Karma: 0
Posts: 14
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

Thank you for the update.

Based on your comments I should be able to plug in my Arduino Ethernet Shield to my soon to be ordered Due.

I also expect that the library should work as before in the new 32-bit environment.

If this is not the case, please let us both know what issues remain with the Ethernet communications aspect of the new Due.

Pat
Logged

Forum Administrator
Milano, Italy
Offline Offline
Sr. Member
*****
Karma: 23
Posts: 292
View Profile
WWW
 Bigger Bigger  Smaller Smaller  Reset Reset

Based on your comments I should be able to plug in my Arduino Ethernet Shield to my soon to be ordered Due.
I also expect that the library should work as before in the new 32-bit environment.

Yup that should work without issues.
Logged

C.

Forum Administrator
Offline Offline
God Member
*****
Karma: 52
Posts: 646
I find plain exciting
View Profile
WWW
 Bigger Bigger  Smaller Smaller  Reset Reset

It needs to be a recent/original arduino ethernet shield because it comes with the right level translators and the rest.

older eth shields (more than 1 year old and incompatible with the Mega) do not work.

m
Logged

Offline Offline
Newbie
*
Karma: 0
Posts: 32
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

I have the Ethernet Shield (rev3) with the Beta Due running a COSM reporting sketch 24/7 for the past 3months with no problems.
Logged

Topsham, Vermont USA
Offline Offline
Edison Member
*
Karma: 33
Posts: 1925
... in The Woods In Vermont
View Profile
WWW
 Bigger Bigger  Smaller Smaller  Reset Reset

Quote
I have the Ethernet Shield (rev3) with the Beta Due running a COSM reporting sketch 24/7 for the past 3months with no problems.

What library are you using? Is one released??   Thanks..
Logged

Regards, Terry King terry@yourduino.com  - Check great prices, devices and Arduino-related boards at http://YourDuino.com
HOW-TO: http://ArduinoInfo.Info

US
Offline Offline
Full Member
***
Karma: 4
Posts: 183
Electronics are the new Legos
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

Please, we need to be very explicit what hardware will work with Due to ensure we keep the "I did ____ with a ____ and now my Due doesn't work" messages to a minimum.
Logged

Volos, Greece
Offline Offline
Newbie
*
Karma: 0
Posts: 1
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

I have an Arduino Due R3 and an Arduino Ethernet Shield R3.
I want to connect these 2 but my worry is about is that the ICSP of the shield will be connected with the SPI of the Due. Do I have to change something in the code that I will use or it's ok?
I saw a tutorial for Arduino Mega and some hacks(cables+code) in order to work these together. Do I have to do something like that?


SOLVED
Just plug the shield in the same pins as shown at the DUE and the shield's ICSP to DUE's SPI.
No conversion to 5V is needed in order to work properly the shield.
« Last Edit: March 20, 2013, 06:28:18 am by virgilios » Logged

Milan
Offline Offline
Sr. Member
****
Karma: 0
Posts: 375
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

Quote
SOLVED
Just plug the shield in the same pins as shown at the DUE and the shield's ICSP to DUE's SPI.
No conversion to 5V is needed in order to work properly the shield.

Are you sayng that Ethernet shield rev 3 works with Arduino Due?
Logged

Munich
Offline Offline
Newbie
*
Karma: 0
Posts: 44
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

Hi,

I have an Arduino DUE R3 and an official Arduino WiFi shield (one month old). Can I just plug my Shield in the DUE, will this work and not damage any hardware? What about the library, do I have to add a special library for the WiFi shield now it is connected to a DUE, or does the WiFi library in the 1.5.5 IDE handles everything?

Thanks in advance :-)

They are both compatible.

For the Wifi shield, the library is still missing, so you can't still use it (unless you port the library by yourself). I'm working on it.

Logged

Let's make it !

Munich
Offline Offline
Newbie
*
Karma: 0
Posts: 44
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

Hey guys,

I tested it yesterday and it is working. I had one small issue though. I started with a Sketch I was using with my UNO, it compiled well, but after uploading it to my DUE, the WiFi was not connecting. Furthermore I noticed that the board actually froze. After some trial-and-error I found out my includes where in the wrong order.

So I changed if from:

Code:
/* Includes */
#include <WiFi.h>
#include <WiFiUdp.h>
#include <SPI.h>

to:

Code:
/* Includes */
#include <SPI.h>
#include <WiFi.h>
#include <WiFiUdp.h>

The weird thing is that with my UNO this was not an issue. Anyway, good luck!

Pieter

Hi,

I have an Arduino DUE R3 and an official Arduino WiFi shield (one month old). Can I just plug my Shield in the DUE, will this work and not damage any hardware? What about the library, do I have to add a special library for the WiFi shield now it is connected to a DUE, or does the WiFi library in the 1.5.5 IDE handles everything?

Thanks in advance :-)

They are both compatible.

For the Wifi shield, the library is still missing, so you can't still use it (unless you port the library by yourself). I'm working on it.

Logged

Let's make it !

Offline Offline
Newbie
*
Karma: 0
Posts: 5
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

HI guys,

I've been having some issues with making the Ethernet Shield (rev 3) work with my Due (rev 3).

More details here:
http://forum.arduino.cc/index.php?topic=223308.0

Any ideas? Would be very grateful, as google seems to be unaware of any issues :/
Logged

Offline Offline
Newbie
*
Karma: 0
Posts: 5
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

I am also having issues...
I have an DUE R3 and Ethernet R3 and I don't seem able to get the Chatserver example to work.
I can see the Ethernet Rx light but no tx light.
The serial monitor works, but I can't get a telnet connection.
Can any one point me in the right direction, or at least say they have the same hardware working?
I'm running on a 64bit Windows 7 Professional machine with service pack 1.

Thanks
Logged

Pages: [1] 2   Go Up
Jump to: