Pages: [1]   Go Down
Author Topic: Chinese 8x8 with TM1639  (Read 503 times)
0 Members and 1 Guest are viewing this topic.
Czech Rep.
Offline Offline
Newbie
*
Karma: 0
Posts: 1
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

I got a 8x8 dot-matrix with TM1639 controller. I was not able to find some readable datasheet on the internet, so, here is a small help if somebody is trying to figure how to control it.

Strange on this is, that you can not push there whole 8bit (row), you need to divide it into 4 bit. I don't know if I am doing something wrong, but now, it's working. Also, I put there an rotation of 90 degree. You can also set brightness in 7 steps.

If somebody will create an "normal" library, I would appreciate that smiley

* Matrix.ino (2.08 KB - downloaded 13 times.)
Logged

Offline Offline
Edison Member
*
Karma: 116
Posts: 2205
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

Sounds like you already have a working code base so producing a library from it would be trivial.

The chip is split into 4-bit chunks. And it works quite similar to max7219.
Logged

Pages: [1]   Go Up
Jump to: