Go Down

Topic: Short circuit or something else ?? (Read 587 times) previous topic - next topic


Hello i have a problem with my wiring... probably....

Im using 3 of these , i have common GND for all 24 leds and chips , and when i feed the chips with 5V without arduino connection , 3 "command" (purple,blue,orange) wires are to "air" , the leds from the 2 chips are off,  the other one is on , when i start touching the 3 cables of each chip,  the leds of the chip are flickering...


I suspect that adding some power bypass caps (.1ufd) for each chip mounted as close to the Vcc and ground pins of the chips might be helpful.



I am using 3 of these

All connected to the same pins or chained or parallel but different input pins?

Anyway decoupling capacitors are needed before you start doing anything else.

Go Up

Please enter a valid email to subscribe

Confirm your email address

We need to confirm your email address.
To complete the subscription, please click the link in the email we just sent you.

Thank you for subscribing!

via Egeo 16
Torino, 10131