Have you looked at iTead Studios, 10 boards, 10x10cm, 2 layers for $24.90.http://imall.iteadstudio.com/open-pcb/pcb-prototyping.html_____Rob
i used this lot a few weeks ago, this is a direct contact, theres lots of middlemen taking cuts, 7 day turnaround and very good quality.http://arduino.cc/forum/index.php/topic,134516.0.html
OSH Park, Very good prices and superb quality. And purple boards on top of that. Did I mention that their quality is the best?I have used OSH Park for the last 6 months and never had any flaws with the boards.
PricingThere are currently three types of orders:The standard 2 layer order$5 per square inch for three copies of your design. For example, a 2 square inch board would cost $10 and you'd get three copies of your board. You can order as many copies as you want, as long as they're in multiples of three.Orders are generally 2 to 3 times a week, and have a turn time of about 12 days. They can be ordered on OSH Park.The 4 layer order$10 per square inch for three copies of your design. For example, a 2 square inch board would cost $20 and you'd get three copies of your board. You can order as many copies as you want, as long as they're in multiples of three.Orders are generally every 3 or 4 weeks and have a turn time of about two weeks. They can be ordered on OSH Park.The medium run order$1 per square inch, 150 square inch minimum. You can have as many different designs as you want, as long as each is ordered in a multiple of 10 boards.These boards cannot be ordered directly through the site. You should send your designs directly to firstname.lastname@example.org to be included.
I believe it turns out to be MORE:http://oshpark.com/pricing
Please enter a valid email to subscribe
We need to confirm your email address.
To complete the subscription, please click the link in the
email we just sent you.
Thank you for subscribing!
via Egeo 16