Go Down

Topic: Help with IR arduino remote (Read 654 times) previous topic - next topic


I've been working on a project for my engineering course and I choose to make an IR remote control after seeing an article on Instructables ( http://www.instructables.com/id/How-to-control-TV-functions-using-Analog-input-and/). Well I've been working with that and Ken Shirriff's IR Library for Arduino (http://www.arcfn.com/2009/08/multi-protocol-infrared-remote-library.html) So far I've had no luck getting a remote to work with either a Hitachi or Panasonic Tv. I was wondering if anyone here has experience with a project like this and would be willing to lend some help? My code so far is:

First Try(100BCBD is the code I received from the remote using an IR sensor) - http://www.textswell.com/read,4243561323955

Second Try(codes are numbers I received through reading raw codes from the remote) - http://www.textswell.com/read,4243572977676



What you can maybe try I get a IR detector, point the real remote to it, press the button you want to emulate and see what value you get. Then you may be able to turn around and send it back from the IR emitter on the arduino.
My GitHub:


The IR library had a example in it called "IRrecord" that was meant to do just that, I tried it out and still no luck :/


It might be a frequency issue, use the pulseIn() function to get the time in Microseconds, then see what your frequency is.

you need to convert that number into seconds and then invert it.

This would be inverting it: 1/(converted number) = frequency.

Then from that go back to that second code you posted and go from there.
My GitHub:

Go Up

Please enter a valid email to subscribe

Confirm your email address

We need to confirm your email address.
To complete the subscription, please click the link in the email we just sent you.

Thank you for subscribing!

via Egeo 16
Torino, 10131