next topic »

[Reply #15 on:]

Ok I understand your misinterpretation

Here is the whole thing, a mess


If someone want the .pdn project (for Paint.NET), just ask.

[Reply #16 on:]

I've just taken some time and removed the resistor attached to RD/3.3v.
I've also soldered a wire onto the pad on the 'RD' side. For now it goes to a 10k resistor, then to 5v.
I have yet to implement the read code, however the hardware changes have not affected the display's operation.

Hopefully I'll have some screen shots in the next couple of days.

[Reply #17 on:]

I suggest you use the read code that can be found in the ArduCam library.

Waiting your screenshots

[Reply #18 on:]

Finally, got some action. Not perfect yet, there is a slight timing error which I'll weed out soon over some coffee. But here is some preliminary shots.

Thanks guix, your thread helped me to do it.

[Reply #19 on:]

Hello pYro 65,

Good job! Once you fix the errors, can you describe precisely how you did the whole thing?

Thanks

[Reply #20 on:]

Sure, i'm going to do a post with a new library one day, for now here is a thread with a video of it running. Once I work out the read function fully I'll post all the details here too.

EDIT: the link may help: http://arduino.cc/forum/index.php/topic,140111.0.html