Pages: 1 [2]   Go Down
Author Topic: SSD1289 : question about the RD pin  (Read 6412 times)
0 Members and 1 Guest are viewing this topic.
France
Offline Offline
Edison Member
*
Karma: 38
Posts: 1009
Scientia potentia est.
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

Ok I understand your misinterpretation smiley-wink

Here is the whole thing, a mess smiley


If someone want the .pdn project (for Paint.NET), just ask.
Logged

North Queensland, Australia
Offline Offline
Edison Member
*
Karma: 70
Posts: 2171
View Profile
WWW
 Bigger Bigger  Smaller Smaller  Reset Reset

I've just taken some time and removed the resistor attached to RD/3.3v.
I've also soldered a wire onto the pad on the 'RD' side. For now it goes to a 10k resistor, then to 5v.
I have yet to implement the read code, however the hardware changes have not affected the display's operation.

Hopefully I'll have some screen shots in the next couple of days.

Logged


France
Offline Offline
Edison Member
*
Karma: 38
Posts: 1009
Scientia potentia est.
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

I suggest you use the read code that can be found in the ArduCam library.

Waiting your screenshots smiley
Logged

North Queensland, Australia
Offline Offline
Edison Member
*
Karma: 70
Posts: 2171
View Profile
WWW
 Bigger Bigger  Smaller Smaller  Reset Reset

Finally, got some action. Not perfect yet, there is a slight timing error which I'll weed out soon over some coffee. But here is some preliminary shots.

Thanks guix, your thread helped me to do it.







« Last Edit: March 07, 2013, 01:39:09 am by pYro_65 » Logged


France
Offline Offline
Edison Member
*
Karma: 38
Posts: 1009
Scientia potentia est.
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

Hello pYro 65,

Good job! Once you fix the errors, can you describe precisely how you did the whole thing?

Thanks smiley
Logged

North Queensland, Australia
Offline Offline
Edison Member
*
Karma: 70
Posts: 2171
View Profile
WWW
 Bigger Bigger  Smaller Smaller  Reset Reset

Sure, i'm going to do a post with a new library one day, for now here is a thread with a video of it running. Once I work out the read function fully I'll post all the details here too.

EDIT: the link may help: http://arduino.cc/forum/index.php/topic,140111.0.html
« Last Edit: January 01, 2013, 08:33:55 am by pYro_65 » Logged


Pages: 1 [2]   Go Up
Jump to: