Go Down

Topic: SparkFun Li-Po Shield: What Resistor To Charge At 500mAh? (Read 781 times) previous topic - next topic




500 mAh is a capacity, not a charge rate.  The charge rate is in mA.  I think a "1C" rate is the current it would take to reach capacity in 1 hour.  In your case: 500 mA (0.5 A).

The schematic shows that the charge current is 1000/R and the built-in R is 10K.  This makes the default current 100 mA (0.1A).  The schematic also says that to get the maximum allowable charge current add a 2.5K resistor.  In the product description it says that the maximum allowed charge current is 500 mA (0.5 A).

So the answer is 2.5k.
Send Bitcoin tips to: 1L3CTDoTgrXNA5WyF77uWqt4gUdye9mezN
Send Litecoin tips to : LVtpaq6JgJAZwvnVq3ftVeHafWkcpmuR1e


http://www.uk-pcb.co.uk - My UK Based PCB Fab & Assembly Company
Design work undertaken
SMD & Thru-Hole assembly

Go Up

Please enter a valid email to subscribe

Confirm your email address

We need to confirm your email address.
To complete the subscription, please click the link in the email we just sent you.

Thank you for subscribing!

via Egeo 16
Torino, 10131