Go Down

Topic: Trying to find Slip Ring (Read 1 time) previous topic - next topic

FatMax

I´ve searched hi and low, for months, but can´t seem to find slip rings anywhere suitable for small motors and electronics. Anybody here who has any suppliers in hand ?

MarkT

This unit was mentioned somewhere recently - lots of connections, can be paralleled up for more current...
http://www.ebay.co.uk/itm/22mm-12-2A-12-Wires-2-amps-12-Conductors-Capsule-Compact-Slip-Ring-220VAC-250Rpm-/300705656201?pt=UK_BOI_Electrical_Components_Supplies_ET&hash=item4603742d89

there are a lot of entries for "slip ring" on eBay.
[ I won't respond to messages, use the forum please ]

FatMax

Jeez, the only place I haven´t looked yet i eBay! *facepalm*

I have looked EVERYWHERE else!

Thank you so much!  :)

MarkT

Never underestimate the power of eBay!!
[ I won't respond to messages, use the forum please ]

JimboZA

Arduino ethernet server here.... http://jimboza.gotdns.com:8085/

No PMs for help please

AWOL

For light-duty stuff, 3.5mm or quarter-inch jacks can be useful.
"Pete, it's a fool looks for logic in the chambers of the human heart." Ulysses Everett McGill.
Do not send technical questions via personal messaging - they will be ignored.

JimboZA


For light-duty stuff, 3.5mm or quarter-inch jacks can be useful.


Could you explain that one please?- maybe a sketch or photo?

Jim
Arduino ethernet server here.... http://jimboza.gotdns.com:8085/

No PMs for help please

retrolefty



For light-duty stuff, 3.5mm or quarter-inch jacks can be useful.


Could you explain that one please?- maybe a sketch or photo?

Jim


Well a 1/4" stereo phone plug and jack would give you three circuit connections that is free to rotate when plugged into it's matching jack.
http://www.parts-express.com/images/products/standard/092-0124_s.jpg

http://i00.i.aliimg.com/img/pb/026/610/446/446610026_805.jpg

Lefty



JimboZA

Arduino ethernet server here.... http://jimboza.gotdns.com:8085/

No PMs for help please

Krupski


For light-duty stuff, 3.5mm or quarter-inch jacks can be useful.


OMG! What a fantastic idea!

It has been added to my mental filing cabinet. Thanks!
Gentlemen may prefer Blondes, but Real Men prefer Redheads!

AWOL

You can also get three and four pole 3.5mm jacks and 2.5mm three pole.
"Pete, it's a fool looks for logic in the chambers of the human heart." Ulysses Everett McGill.
Do not send technical questions via personal messaging - they will be ignored.

retrolefty

#11
Dec 12, 2012, 06:58 pm Last Edit: Dec 12, 2012, 07:23 pm by retrolefty Reason: 1

You can also get three and four pole 3.5mm jacks and 2.5mm three pole.



And four poles could allow you to pass power, ground, and a full duplex comm link through the rotating and fixed assemblies. What more could a rotating project require.  ;)

Lefty

AWOL

I've also heard of people using those phone cable untangler things for this purpose too.
"Pete, it's a fool looks for logic in the chambers of the human heart." Ulysses Everett McGill.
Do not send technical questions via personal messaging - they will be ignored.

Go Up