Pages: [1]   Go Down
Author Topic: Esplora  (Read 1779 times)
0 Members and 1 Guest are viewing this topic.
Hillsboro, OR
Offline Offline
Newbie
*
Karma: 0
Posts: 5
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

I just saw an article about the new Esplora product.  It looks quite fun, even with the severe I/O limitations of the design.  One thought for a future addition:  Why not integrate something like an XBee compatible interface, or allow that type of expansion?  I'm playing with an Arduino controlled quadcopter project right now, and have done a few other little radio control projects where I used an Arduino.  The Esplora could be an amazingly simple controller platform for some of those types of projects, with just a few tweaks to allow a bit more outside communications.

Just something to think about...
Logged

Portland, OR
Offline Offline
Sr. Member
****
Karma: 7
Posts: 260
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

+1 on the wireless capability -- perhaps this could be done via a TinkerKit attachable?
@Vrmithrax: What do you mean by severe I/O limitations? It does appear to have several pin outs -- just not in the Arduino shield format
Logged

Ayer, Massachusetts, USA
Offline Offline
Edison Member
*
Karma: 54
Posts: 1857
View Profile
WWW
 Bigger Bigger  Smaller Smaller  Reset Reset

+1 on the wireless capability -- perhaps this could be done via a TinkerKit attachable?
@Vrmithrax: What do you mean by severe I/O limitations? It does appear to have several pin outs -- just not in the Arduino shield format
IIRC, it has 2 output and 2 input pins, not counting the LCD pins or the USB.  But evidently you can daisy chain some of the I/O with SPI.
Logged

Hillsboro, OR
Offline Offline
Newbie
*
Karma: 0
Posts: 5
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

+1 on the wireless capability -- perhaps this could be done via a TinkerKit attachable?
@Vrmithrax: What do you mean by severe I/O limitations? It does appear to have several pin outs -- just not in the Arduino shield format

I just mean that it's more of a limited proposition than a standard Arduino.  The I/O is kind of there, but it's all tied up in the built-in functions (buttons, joysticks, etc), other than the few available for use with Tinkerkits.  With a regular Arduino system, you have much more I/O options, plus the shield expansion capabilities.  That's what I mean by severe I/O limitations...
Logged

US
Offline Offline
Full Member
***
Karma: 4
Posts: 183
Electronics are the new Legos
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

you can roll your own radio but I tend to agree it would be helpful if the designers could make it such that a usb connection is not the only power source. http://21stdigitalhome.blogspot.com/2013/01/wireless-arduino-esplora-controls.html
Logged

Pages: [1]   Go Up
Jump to: