Go Down

Topic: Raspberry Pi Screw Shield (Read 135 times) previous topic - next topic

CrossRoads

Jun 13, 2015, 06:00 am Last Edit: Jun 14, 2015, 01:21 am by CrossRoads
I've come up with a Pi Screw Shield to bring the 40 terminals out to 3.5mm pitch screw terminals.
It can be plugged directly onto a Pi (female header option pictured) or it can be connected via ribbon cable (male header option). 4 pairs each of A/GND and B/GND can be used to connect to Pi power/gnd pins.
(Pi pinout varies by model, so no connections to pins were made for these.)
Assembled board $30. USPS and paypal fee added. Worldwide shipping available.
PM me or e-mail to robert@crossroadsfencing.com
http://www.crossroadsfencing.com/BobuinoRev17/


Designing & building electrical circuits for over 25 years.  Screw Shield for Mega/Due/Uno,  Bobuino with ATMega1284P, & other '328P & '1284P creations & offerings at  my website.

Isaac96

Looks almost exactly like the new Mega screw shield!  ;)
I use UnoJoy and Hoodloader for HID. No Leonardo!
Do not PM me for help.Only links to topics.

CONNECT THE GROUNDS!

robtillaart

Looks almost exactly like the new Mega screw shield!  ;)
You should never change too much on a good design ;)
Rob Tillaart

Nederlandse sectie - http://arduino.cc/forum/index.php/board,77.0.html -
(Please do not PM for private consultancy)

Isaac96

You should never change too much on a good design ;)
Not a good design-a great one.
I use UnoJoy and Hoodloader for HID. No Leonardo!
Do not PM me for help.Only links to topics.

CONNECT THE GROUNDS!

CrossRoads

Yes  - same PCB, flipped over & populated from the other side. A few more pins on the header, 40 vs 36.
Designing & building electrical circuits for over 25 years.  Screw Shield for Mega/Due/Uno,  Bobuino with ATMega1284P, & other '328P & '1284P creations & offerings at  my website.

Go Up